Turnbuckle Swaged 829
The stainless steel turnbuckle with external threads swaged offer supierior tensioning ability within a stainless steel wire rope assembly. The stainless steel turnbuckle gives the opportunity to run greater lengths on balustrades, bridge paraphets and wire trellis systems by reducing the amount of sag inherrent with stainless steel wire rope assemblies over long runs.
Our stainless steel rigging screws are set mid span so the adjustment given in the table below gives a 'plus / minus' range. Locked off with hexagon nuts, the stainless steel turnbuckle assembly offers great security also.
The turnbuckle threads swaged are available in a variety of sizes to suit stainless steel wire ropes from: 2mm ø - 12mm ø and offer thread sizes of: M5 - M20 respectively.
Material: Stainless steel AISI 316L - left/right swaged external threads are screwed half way into the turnbuckle. The minimum screw-in depth is 1.5 x the thread diameter (ø) (M8 = 12mm) kN = Breaking load.
Buy Assembly
| Choose a type: | |
| Specify quantity: | |
| Price | |||||||||
| Part number | ø rope | a | b1 | b2 | ød | Adjustment | kN | For Component | |
| 829-0200-01 | 2 | M5 | 166 | 80 | 8 | +16 | -26 | 2.8 | £9.69 | |
| 829-0200-02 | 2 | M5 | 211 | 80 | 8 | +30 | -40 | 2.8 | £10.05 | |
| 829-0300-02 | 3 | M6 | 250 | 92 | 10 | +32 | -44 | 6.3 | £11.54 | |
| 829-0400-02 | 4 | M6 | 260 | 92 | 10 | +32 | -44 | 11.2 | £11.98 | |
| 829-0400-03 | 4 | M8 | 270 | 112 | 13.5 | +38 | -54 | 11.2 | £17.80 | |
| 829-0500-02 | 5 | M8 | 280 | 112 | 13.5 | +38 | -54 | 17.5 | £14.69 | |
| 829-0600-02 | 6 | M10 | 340 | 120 | 17.2 | +40 | -60 | 25.2 | £20.02 | |
| 829-0800-01 | 8 | M12 | 425 | 150 | 21.3 | +46 | -70 | 39.5 | £33.88 | |
| 829-1000-01 | 10 | M16 | 560 | 190 | 26.9 | +62 | -94 | 61.7 |
£83.64 |
|
| 829-1200-01 | 12 | M20 | 646 | 220 | 33.7 | +70 | -110 | 83.2 | £109.24 |